Stats NZ has a new website.

For new releases go to

As we transition to our new site, you'll still find some Stats NZ information here on this archive site.

  • Share this page to Facebook
  • Share this page to Twitter
  • Share this page to Google+
Household Labour Force Survey: September 2011 quarter
Embargoed until 10:45am  –  03 November 2011
Data quality

This section has information about data that does not change between releases.

Data source

The target population for the Household Labour Force Survey (HLFS) is the civilian, usually resident, non-institutionalised population aged 15 years and over.

The statistics in this release do not cover:

  • long-term residents of homes for older people, hospitals, and psychiatric institutions 
  • those living in non-private dwellings (ie hotels, motels, hostels etc) 
  • inmates of penal institutions
  • members of the permanent armed forces
  • members of the non-New Zealand armed forces 
  • overseas diplomats
  • overseas visitors who expect to be resident in New Zealand for less than 12 months
  • those aged under 15 years
  • people living on offshore islands (except Waiheke Island).

Accuracy of the data

Sample design

The HLFS sample contains about 15,000 private households and about 30,000 individuals each quarter. Households are sampled on a statistically representative basis from areas throughout New Zealand, and information is obtained for each member of the household. The sample is stratified by geographic region, urban and rural areas, ethnic density, and socio-economic characteristics.

Households stay in the survey for two years. Each quarter, one-eighth of the households in the sample are rotated out and replaced by a new set of households. Therefore, up to seven-eighths of the same people are surveyed in adjacent quarters. This overlap improves the reliability of quarterly change estimates.

The period of surveying/interviewing consists of 13 weeks. The information obtained relates to the week before the interview (referred to as the ‘survey reference week’). Respondents are first interviewed face-to-face at their home. Subsequent interviews are by telephone wherever possible. Respondents also have the option to file self-complete questionnaires.

Where practicable, the information is obtained directly from each household member. Otherwise a proxy interview is conducted, whereby details are obtained from another adult in the household.

Sampling errors

Sampling error can be measured, and quantifies the variability that occurs by chance because a sample rather than an entire population is surveyed.

Sampling errors are calculated for each cell in the published tables and for estimates of change between adjacent quarters using a model-based approach. For example, the estimated total number of people employed in the September 2011 quarter is 2,206,300 before seasonal adjustment. This estimate is subject to a sampling error of plus or minus 21,800, or 1.0 percent (measured at the 95 percent confidence level). This means that there is a 95 percent chance that the true number of employed people lies between 2,184,500 and 2,228,100.

Smaller estimates, such as the number of people who are unemployed, are subject to larger relative sampling errors than larger estimates. For example, the estimated total number of people unemployed in the September 2011 quarter is 151,200 before seasonal adjustment. This estimate is subject to a sampling error of plus or minus 9,500 or 6.3 percent (measured at the 95 percent confidence level). This means that there is a 95 percent chance that the true number of unemployed people lies between 141,700 and 160,700.

Estimates of change are also subject to sampling error. For example, the survey estimate of change in total employment from the June 2011 quarter to the September 2011 quarter is a decrease of 2,000. This estimate is subject to a sampling error of plus or minus 18,600 (at the 95 percent confidence level). Therefore, the true value of the change in surveyed employment from the June 2011 quarter to the September 2011 quarter has a 95 percent chance of lying between -20,600 and 16,600.

A change in an estimate, either from one adjacent quarter to the next, or between quarters a year apart, is said to be statistically significant if it is larger than the associated sampling error. Therefore, the example quoted above does not represent a significant movement.

In general, the sampling errors associated with subnational estimates (eg breakdowns by regional council area or ethnic group) are larger than those associated with national estimates.

A non-sampling error is very difficult to measure, and if present can lead to biased estimates. Statistics New Zealand endeavours to minimise the impact of these errors by applying best survey practices and monitoring known indicators (eg non-response).

Suppression of data

Cells with estimates of less than 1,000 are suppressed and appear as ‘S’ in the tables. These estimates are subject to sampling errors too great for most practical purposes.

Response rates

The target response rate for the HLFS is 90 percent. The response rate is calculated by determining the number of eligible households who responded to the survey, as a proportion of the estimated number of total eligible households in the sample. The following table shows the HLFS response rates for the last five quarters.

HLFS response rates
Quarter National response rate
September 2010 86.1
December 2010 87.7
March 2011 84.3
June 2011 87.2
September 2011 88.2

Seasonal adjustment and trend series

In the labour market, cyclical events that affect labour supply and demand occur around the same time each year. For example, in summertime a large pool of student labour is both available for, and actively seeking, work. Demand for labour in the retail sector and in many primary production industries also increases.

For any series, the estimates can be broken down into three components: trend, seasonal, and irregular. Seasonally adjusted series have had the seasonal component removed. Trend series have had both the seasonal and irregular components removed, and reveal the underlying direction of movement in a series.

The series for each labour market statistic is adjusted separately. For this reason, the sum of the seasonally adjusted estimates for employment, unemployment, and people not in the labour force will usually not add up to the working-age population estimates.

See Seasonal adjustment in Statistics New Zealand for more information about how we seasonally adjust our statistics. Seasonal adjustment makes data for adjacent quarters more comparable by smoothing out the effect on the times series of any regular seasonal events. This ensures that the underlying movements in the time series are more visible. All seasonally adjusted and trend series are produced using the X-12-ARIMA Version 0.2.10 package developed by the U.S. Census Bureau.

Quality of seasonal adjustment

We monitor our data to make sure that our seasonal adjustment is robust.

The X-12-ARIMA programme is highly customisable and can produce a wide variety of possible adjustments for any particular input series. Consequently, X-12-ARIMA produces a number of diagnostics which are useful in assessing the quality of the chosen adjustment.

The following table provides a selection of diagnostics. The reference value provides an indication of the desired value for each. Most are acceptable, though there is evidence of a changing seasonal pattern for the number of males who are unemployed and females who are not in labour force. More detail about seasonal adjustment in the HLFS is available upon request.

Seasonal adjustment diagnostics
Reference value Male employed Female employed Male unemployed Female unemployed Male not in labour force Female not in labour force
Test for seasonality <0.10 0.00 0.00 0.00 0.00 0.00 0.00
Test for moving seasonality >0.10 0.20 0.64 0.02 0.25 0.67 0.05
Periods until trend dominates <3 1 1 1 2 2 2
Trend contribution to change <20 32.34 42.90 47.05 14.84 12.48 20.66
Seasonal contribution to change >50 58.31 41.88 31.05 68.54 75.92 51.66
Irregular contribution to change <20 9.35 15.21 21.91 16.63 11.60 27.68
Quality statistic <1 0.42 0.51 0.71 0.67 0.64 0.94


During the seasonal adjustment process, X-12-ARIMA can give less weight to the irregular component. Specifically, if the estimated irregular component at a point in time is sufficiently large compared with the standard deviation of the irregular component as a whole, then the irregular component at that point can be downweighted or removed completely and re-estimated. Such observations are referred to as partial and zero-outliers, respectively. In practice, the downweighting of outliers will do little to seasonally adjusted data, but the impact of the outliers on the trend series will generally be reduced. However, if an outlier ceases to be an outlier as more data becomes available, then significant revisions to the trend series become possible. There are no outliers present over the last 4 quarters of data.


Each quarter, the seasonal adjustment process is applied to the latest quarter and all previous quarters. This means that seasonally adjusted estimates for any of the previously published quarters may change slightly. The following table lists the change in estimates between the current and previous publication for the seasonally adjusted data. For example, in the June 2011 quarter release, the seasonally adjusted number of females employed for June 2011 was 1,039,000. In the September 2011 quarter release, that same estimate has been revised to 1,038,000. These numbers are rounded to the nearest 1,000, but the relative change derived from the unrounded estimates is a downwards revision of 0.1 percent.

Percent revision from last published, seasonally adjusted
Quarter Male employed Female employed Male unemployed Female unemployed Male not in labour force Female not in labour force
Sep 2010 -0.02 0.11 0.18 -0.70 0.06 -0.15
Dec 2010 0.07 0.00 -0.11 0.22 -0.19 0.00
Mar 2011 -0.07 -0.02 0.11 0.06 0.19 0.05
Jun 2011 0.02 -0.10 -0.26 0.52 -0.08 0.12

The following table presents information on how the trend estimates have been revised. Trend revisions are generally larger than those of the seasonally adjusted data.

Percent revision from last published, trend
Quarter Male employed Female employed Male unemployed Female unemployed Male not in labour force Female not in labour force
Sep 2010 -0.08 0.04 -0.03 -0.22 0.23 -0.06
Dec 2010 -0.19 0.04 0.07 -0.14 0.54 -0.05
Mar 2011 -0.17 0.05 0.33 -0.18 0.44 -0.04
Jun 2011 0.06 -0.39 -0.18 1.77 -0.33 0.47

Every estimate is subject to revision each quarter as new data is added, though in practice estimates more than two years from the end-point will change little. For example, the trend estimate of male employment for the September 2010 quarter was 1,171,000 when first published. In the September 2011 quarter, one year later, the trend estimate of male employment for the September 2010 quarter is 1,166,000, a decrease of -5,000 (-0.4%). This is an example of a '4-step ahead' revision. The table below shows the average of all such absolute revisions expressed relatively and gives some indication of how much the current estimates might be revised when the December 2011 data becomes available.

Mean absolute percent revisions
Seasonally adjusted Trend
1-step 4-step 1-step 4-step
Male employed 0.05 0.08 0.16 0.17
Female employed 0.07 0.12 0.27 0.27
Male unemployed 0.44 0.69 1.65 1.73
Female unemployed 0.53 0.99 1.92 1.89
Male not in labour force 0.09 0.17 0.36 0.38
Female not in labour force 0.09 0.15 0.36 0.39

Rounding procedures

Figures presented in this release are rounded. Figures are rounded to the nearest hundred or to the nearest thousand for seasonally adjusted and trend estimates. This may result in a total disagreeing slightly with the sum of the individual items as shown in the table. Where figures are rounded the unit is shown as (000) for thousands.

How labour force statistics are classified

The HLFS release includes specific statistics about industry, occupation, study, ethnicity, and region. This section defines what we measure for each of these statistics.

Industry statistics

Since the September 2009 quarter, the industry statistics are based on the Australian and New Zealand Standard Industrial Classification 2006 (ANZSIC06), the latest edition of the classification. When ANZSIC06 was introduced, Statistics NZ developed the New Zealand Standard Industrial Output Categories (NZSIOC). Classifying industries using NZSIOC will help to standardise outputs. The 1996 version (ANZSIC96), used in industry outputs in previous releases, has been updated to the 2006 edition. Industry outputs defined using ANZSIC06 are not comparable with those based on ANZSIC96.

See Implementing ANZSIC 2006 in the Household Labour Force Survey for more information.

Occupation statistics

Since the September 2009 quarter, the Australian and New Zealand Standard Classification of Occupations (ANZSCO) was used to classify occupation data in the HLFS. ANZSCO is a harmonised classification which has been developed by Statistics NZ, the Australian Bureau of Statistics, and the Australian Department of Employment and Workplace Relations, for use in both Australia and New Zealand. Occupation data was previously based on the New Zealand Standard Classification of Occupations 1999 (NZSCO99). The occupation data is available on Infoshare.

See Implementing ANZSCO in the Household Labour Force Survey for more information.

Ethnic statistics

In the September 2008 quarter, Statistics New Zealand started publishing ethnicity data using the single/combination output method in the HLFS. Using the single/combination ethnicity output, people are counted just once, according to the ethnic group or combination of ethnic groups they have reported. This means that the total number of responses equals the total number of people who stated an ethnicity. This created a complete break in the ethnicity series, as the prioritisation of ethnic groups was no longer produced.

An alternate method of classifying ethnicity is using the total response ethnicity output. Using this classification, people who reported that they belonged to more than one ethnic group are counted once in each group reported. This means that the total number of responses for all ethnic groups can be greater than the total number of people who stated their ethnicities. The table below shows total response for the June 2011 and September 2011 quarters of the HLFS.

Total response HLFS ethnicity data for working-age population(1)
Ethnic group June 2011 quarter  September 2011 quarter
European 2,586,500 2,560,400
Māori 436,500 441,300
Pacific peoples 188,700 210,600
Asian 367,100 376,800
MELAA(2) 41,100 35,900
Other 72,800 73,600
1. The sum of ethnic groups will not equal the total working-age population as the total response method of grouping ethnicity data counts each response given by an individual.
2. MELAA = Middle Eastern/Latin American/African.

See the 2005 New Zealand standard classification of ethnicity for more information.

Māori benchmarks

Before April 2009, the Māori working-age population was not benchmarked to population estimates. This, along with other sample design restrictions, caused a high degree of volatility in Māori statistics in the HLFS. Movements in the working-age population estimates of certain ethnic groups, such as Māori, may reflect this volatility rather than a real change in the estimated ethnic demographic. Including Māori benchmarks in the working-age population mitigates the known undercount of Māori in the HLFS and also results in smoother time series for Māori statistics in the HLFS. However, introducing the Māori population benchmarks does not necessarily translate to improved estimates for non-Māori ethnic groups.

Household statistics

A household's labour force status is derived by looking at the labour force status of members in the household aged 18–64 years. For example, if a couple is living by themselves and one is aged 64 years and the other is aged 65 years, this couple will be assigned to the 'All employed' or 'None employed' category, depending on the labour force status of the 64-year-old.

Households that have no members aged 18–64 years are excluded from this analysis. The household categories incorporate the concept of dependent children rather than just children. A child is a person of any age who usually resides with at least one parent (natural, step, adopted, or foster) and who does not usually reside with a partner or child(ren) of his or her own. Statistics NZ defines a dependent child as a child aged less than 18 years and not in full-time employment.

Updated regional classification

In November 2010, the new Auckland territorial authority (TA) replaced the existing Rodney District, North Shore City, Auckland City, Waitakere City, Manukau City, Papakura District, and part of Franklin District councils. This resulted in a minor change in the boundary between the Auckland and Waikato regions.

From the June 2011 quarter, the statistics in the HLFS release were produced using the new boundaries and backcast for the March 2011 quarter. The new boundaries do not significantly affect measures from the HLFS.

Comparability with other datasets

See Comparing our labour market statistics for more information on how the HLFS compares with the other labour market statistics that we produce. This page explains what measures of employment are included in each of our employment releases, and the timings and coverage of each release.

See A Guide to Unemployment Statistics for more information on the comparison of the HLFS with other datasets on unemployment. This page explains what measures of unemployment are included in the HLFS, the unemployment benefit and the job-seekers register. It also includes information on the timings, coverage, and different purposes of each of these measures.

International comparability of the labour force participation rate

Several alternative definitions of labour force participation rate are in use by other organisations and countries; they differ in regard to age of the working-age population and the inclusion of military personnel. A common definition is to restrict the labour force and working-age population to the 15–64 year age group, particularly in countries with a compulsory retirement age. Generally, this definition leads to a higher labour force participation rate. Using this definition for the New Zealand HLFS in the September 2011 quarter gives a surveyed figure of 77.4 percent.

Interpreting the data

This release contains seasonally adjusted, trend, and survey statistics for the September 2011 quarter. These statistics are averages for the three-month period and do not apply to any specific point in time. Data sourced from the seasonally adjusted series and trend series are identified as such in the table or section headings. All other data, in the commentary or in tables, are sourced from the original survey series and are unadjusted.

Timing of published data

The HLFS is published within 6 weeks after the end of the reference period of the quarter.


Only people authorised by the Statistics Act 1975 are allowed to see your individual information, and they must use it only for statistical purposes. Your information will be combined with similar information from other people or households to prepare summary statistics.

More information

For more technical information, see Information about the Household Labour Force Survey.


While all care and diligence has been used in processing, analysing, and extracting data and information in this publication, Statistics NZ gives no warranty it is error-free and will not be liable for any loss or damage suffered by the use directly, or indirectly, of the information in this publication.


Timed statistical releases are delivered using postal and electronic services provided by third parties. Delivery of these releases may be delayed by circumstances outside the control of Statistics NZ. Statistics NZ accepts no responsibility for any such delays.

Crown copyright©

Creative Commons logo.
This work is licensed under the Creative Commons Attribution 3.0 New Zealand licence. You are free to copy, distribute, and adapt the work, as long as you attribute the work to Statistics NZ and abide by the other licence terms. Please note you may not use any departmental or governmental emblem, logo, or coat of arms in any way that infringes any provision of the Flags, Emblems, and Names Protection Act 1981. Use the wording 'Statistics New Zealand' in your attribution, not the Statistics NZ logo.

  • Share this page to Facebook
  • Share this page to Twitter
  • Share this page to Google+
  • Share this page to Facebook
  • Share this page to Twitter
  • Share this page to Google+